commit 4955f57652aa49a398e267fe2c3861ba7b1c1e8d Author: kicap Date: Sat Aug 3 12:49:49 2024 +0800 first commit diff --git a/.gitignore b/.gitignore new file mode 100644 index 0000000..89cc49c --- /dev/null +++ b/.gitignore @@ -0,0 +1,5 @@ +.pio +.vscode/.browse.c_cpp.db* +.vscode/c_cpp_properties.json +.vscode/launch.json +.vscode/ipch diff --git a/.vscode/extensions.json b/.vscode/extensions.json new file mode 100644 index 0000000..080e70d --- /dev/null +++ b/.vscode/extensions.json @@ -0,0 +1,10 @@ +{ + // See http://go.microsoft.com/fwlink/?LinkId=827846 + // for the documentation about the extensions.json format + "recommendations": [ + "platformio.platformio-ide" + ], + "unwantedRecommendations": [ + "ms-vscode.cpptools-extension-pack" + ] +} diff --git a/image.png b/image.png new file mode 100644 index 0000000..2fe6740 Binary files /dev/null and b/image.png differ diff --git a/include/README b/include/README new file mode 100644 index 0000000..194dcd4 --- /dev/null +++ b/include/README @@ -0,0 +1,39 @@ + +This directory is intended for project header files. + +A header file is a file containing C declarations and macro definitions +to be shared between several project source files. You request the use of a +header file in your project source file (C, C++, etc) located in `src` folder +by including it, with the C preprocessing directive `#include'. + +```src/main.c + +#include "header.h" + +int main (void) +{ + ... +} +``` + +Including a header file produces the same results as copying the header file +into each source file that needs it. Such copying would be time-consuming +and error-prone. With a header file, the related declarations appear +in only one place. If they need to be changed, they can be changed in one +place, and programs that include the header file will automatically use the +new version when next recompiled. The header file eliminates the labor of +finding and changing all the copies as well as the risk that a failure to +find one copy will result in inconsistencies within a program. + +In C, the usual convention is to give header files names that end with `.h'. +It is most portable to use only letters, digits, dashes, and underscores in +header file names, and at most one dot. + +Read more about using header files in official GCC documentation: + +* Include Syntax +* Include Operation +* Once-Only Headers +* Computed Includes + +https://gcc.gnu.org/onlinedocs/cpp/Header-Files.html diff --git a/lib/README b/lib/README new file mode 100644 index 0000000..2593a33 --- /dev/null +++ b/lib/README @@ -0,0 +1,46 @@ + +This directory is intended for project specific (private) libraries. +PlatformIO will compile them to static libraries and link into executable file. + +The source code of each library should be placed in an own separate directory +("lib/your_library_name/[here are source files]"). + +For example, see a structure of the following two libraries `Foo` and `Bar`: + +|--lib +| | +| |--Bar +| | |--docs +| | |--examples +| | |--src +| | |- Bar.c +| | |- Bar.h +| | |- library.json (optional, custom build options, etc) https://docs.platformio.org/page/librarymanager/config.html +| | +| |--Foo +| | |- Foo.c +| | |- Foo.h +| | +| |- README --> THIS FILE +| +|- platformio.ini +|--src + |- main.c + +and a contents of `src/main.c`: +``` +#include +#include + +int main (void) +{ + ... +} + +``` + +PlatformIO Library Dependency Finder will find automatically dependent +libraries scanning project source files. + +More information about PlatformIO Library Dependency Finder +- https://docs.platformio.org/page/librarymanager/ldf.html diff --git a/platformio.ini b/platformio.ini new file mode 100644 index 0000000..345cd40 --- /dev/null +++ b/platformio.ini @@ -0,0 +1,15 @@ +; PlatformIO Project Configuration File +; +; Build options: build flags, source filter +; Upload options: custom upload port, speed and extra flags +; Library options: dependencies, extra library storages +; Advanced options: extra scripting +; +; Please visit documentation for the other options and examples +; https://docs.platformio.org/page/projectconf.html + +[env:esp12e] +platform = espressif8266 +board = esp12e +framework = arduino +; lib_deps = arduino-libraries/ArduinoHttpClient@^0.6.1 diff --git a/readme.md b/readme.md new file mode 100644 index 0000000..1cb90e5 --- /dev/null +++ b/readme.md @@ -0,0 +1,5 @@ +# Traffic Light Disfunctio Monitoring (ESP8266) + +### traffic light disfunction monitoring, this esp8266 receive data from arduino uno using serial communication because of limitation of uno . + +![alt text](image.png) \ No newline at end of file diff --git a/src/main.cpp b/src/main.cpp new file mode 100644 index 0000000..f665231 --- /dev/null +++ b/src/main.cpp @@ -0,0 +1,128 @@ +#include +#include "SoftwareSerial.h" +#include +#include +const int ledPin = 2; // GPIO2 is typically the onboard LED pin on ESP8266 + +const char *ssid = "Bismillah"; +const char *password = "1234567890"; +// const char *ssid = "KARAN"; +// const char *password = "12345679"; + +WiFiClient client; + +SoftwareSerial fromUno(13, 15); // RX, TX + +void setup() +{ + Serial.begin(9600); + fromUno.begin(9600); + + // Initialize the LED pin as an output + pinMode(ledPin, OUTPUT); + digitalWrite(ledPin, HIGH); // Turn off LED initially + + Serial.println(); + Serial.println(); + Serial.print("Connecting to "); + Serial.println(ssid); + + WiFi.begin(ssid, password); + + while (WiFi.status() != WL_CONNECTED) + { + delay(500); + Serial.print("."); + } + + Serial.println(""); + Serial.println("WiFi connected"); + Serial.println("IP address: "); + Serial.println(WiFi.localIP()); + digitalWrite(ledPin, LOW); // Turn on LED to indicate Wi-Fi connected +} + +void loop() +{ + if (WiFi.status() == WL_CONNECTED) + { + digitalWrite(ledPin, LOW); // Turn on LED to indicate Wi-Fi connected + String data = ""; + while (fromUno.available() > 0) + { + data += char(fromUno.read()); + // delay(1); + } + // Serial.println(data); + + // Ensure the data string is properly terminated + data.trim(); + + // Split the data string by commas + int commaIndex1 = data.indexOf(','); + String light = data.substring(0, commaIndex1); + int commaIndex2 = data.indexOf(',', commaIndex1 + 1); + String pln = data.substring(commaIndex1 + 1, commaIndex2); + int commaIndex3 = data.indexOf(',', commaIndex2 + 1); + String value1 = data.substring(commaIndex2 + 1, commaIndex3); + int commaIndex4 = data.indexOf(',', commaIndex3 + 1); + int commaIndex5 = data.indexOf(',', commaIndex4 + 1); + String value2 = data.substring(commaIndex3 + 1, commaIndex4); + String value3 = data.substring(commaIndex4 + 1, commaIndex5); + String value4 = data.substring(commaIndex5 + 1); + + // Ensure no extra data is included + value4 = value4.substring(0, value4.indexOf('\n') >= 0 ? value4.indexOf('\n') : value4.length()); + + // Construct the JSON payload + String jsonSend = "{\"light\":\"" + light + "\",\"pln\":\"" + pln + "\",\"value1\":\"" + value1 + "\",\"value2\":\"" + value2 + "\",\"value3\":\"" + value3 + "\",\"no\":\"" + value4 + "\"}"; + + Serial.println(jsonSend); + + HTTPClient http; + http.begin(client, "http://traffic-light2.kicap-karan.com/"); + http.addHeader("Content-Type", "application/json"); + int httpResponseCode = http.POST(jsonSend); + if (httpResponseCode > 0) + { + Serial.print("HTTP Response code: "); + Serial.println(httpResponseCode); + } + else + { + Serial.print("Error code: "); + Serial.println(httpResponseCode); + } + http.end(); + delay(1000); + } + else + { + Serial.println("WiFi is disconnected, attempting to reconnect"); + digitalWrite(ledPin, HIGH); + WiFi.begin(ssid, password); + + // Wait for connection + int timeout = 0; + while (WiFi.status() != WL_CONNECTED && timeout < 20) + { // wait for 10 seconds max + delay(500); + Serial.print("."); + timeout++; + } + + if (WiFi.status() == WL_CONNECTED) + { + Serial.println(""); + Serial.println("Reconnected to WiFi"); + Serial.println("IP address: "); + Serial.println(WiFi.localIP()); + digitalWrite(ledPin, LOW); // Turn on LED to indicate Wi-Fi connected + } + else + { + Serial.println(""); + Serial.println("Failed to reconnect to WiFi"); + } + } +} diff --git a/test/README b/test/README new file mode 100644 index 0000000..9b1e87b --- /dev/null +++ b/test/README @@ -0,0 +1,11 @@ + +This directory is intended for PlatformIO Test Runner and project tests. + +Unit Testing is a software testing method by which individual units of +source code, sets of one or more MCU program modules together with associated +control data, usage procedures, and operating procedures, are tested to +determine whether they are fit for use. Unit testing finds problems early +in the development cycle. + +More information about PlatformIO Unit Testing: +- https://docs.platformio.org/en/latest/advanced/unit-testing/index.html